15
• The time can be set in the EMOS GoSmart app in the Boost tab.
• The length of the heating interval can be set to 100–900 seconds.
Temperature Dierential Setting
• This feature can only be adjusted on the screen of the thermostatic head itself.
• The dierential can be set to 0.5 °C, 1 °C, 1.5 °C.
• The temperature dierential (hysteresis) is the dierence in temperature
required for switching the heating system on and o.
• For instance, if you set the temperature to 20 °C and the dierential to
1 °C, the thermostatic head activates heating as soon as room temperature
drops to 19 °C and switches heating o when temperature reaches 21 °C.
Controlling the Valve
• Can only be adjusted on the screen of the thermostatic head itself.
• These controls enable you to set how the valve of the thermostatic head
is to be controlled.
• Value = 0: control in accordance with the modes you have set; value = 1
automatic control based on current temperature.
• When automatic control is selected, the valve is controlled as follows:
• If the temperature you set is 2 °C higher than the temperature in the
room, the valve is 100 % open.
• If the temperature you set is 1 °C higher than the temperature in the
room, the valve is 75 % open.
• If the temperature you set is the same (±0.5 °C) as the temperature in
the room, the valve is 50 % open.
• If the temperature you set is 1 °C lower than the temperature in the
room, the valve is 25 % open.
• If the temperature you set is 2 °C lower than the temperature in the
room, the valve is closed.
Setting Modes and Functions on the Screen of the Thermostatic Head
• Once batteries are inserted, the thermostatic head turns on and the entire
screen lights up. Then the
icon will light up. Pressing the
button allows you to set the current time. Set, in this order, hours, minutes
To Next Page