Need help?Do you have a question about the Emotiva basX A-700 and is the answer not in the manual?
General| Channels | 7 |
|---|---|
| Minimum Recommended Load Impedance | 4 Ohms |
| Gain | 29 dB |
| Trigger | 12V Trigger Input |
| Power Consumption | 400 Watts |
| Power output (8 Ohms) | 80 Watts |
| Frequency Response | 20 Hz - 20 kHz |
| Signal to Noise Ratio | > 100 dB |
| Dimensions (W x H x D) | 17 inches |
Allows the user to switch the amplifier on or return it to standby mode.
Displays the status of the amplifier's LEDs, indicating operating status or faults.
Enables external control of amplifier power status via a 12 VDC signal.
Disables the front panel status LEDs when set to Off.
Provides independent unbalanced (RCA) inputs for each amplifier channel.
Indicates the detected AC line voltage for amplifier operation.
Switches the main AC power to the amplifier on and off.
Features heavy duty five-way binding posts for speaker cable connection.
Accepts a standard removable IEC AC power cable for power connection.
Details how to connect speakers using the five-way binding posts.
Explains connecting unbalanced RCA inputs from audio sources.
Describes using trigger signals for amplifier power control.
Explains automatic detection of 115/230 VAC line voltage.
States that the amplifier requires no periodic maintenance or calibration.
Provides instructions on how to clean the amplifier gently and safely.
Covers power output, bandwidth, frequency response, THD, and S/N ratio.
Details impedance, damping factor, output connections, and power supply.
Covers input sensitivity, gain, impedance, trigger, and power requirements.
Describes front/rear panel controls and the amplifier's protection features.
Provides physical dimensions for the amplifier (width, height, depth).
Lists the unboxed weight for BASX A-300, A-500, and A-700 models.
Addresses problems with no output, no power, or front panel LEDs not lighting.
Diagnoses issues with no sound, distorted audio, or fault indicator lights.
Troubleshoots issues related to the amplifier failing to turn on via trigger signals.
Details what is covered, duration, and exclusions of the warranty.
Explains Emotiva's resolution options, how to get service, and international handling.
Covers state law impact, shipping damage during service, and international orders.
Recommends using high-quality cables for optimal sound and reliability.
To Next Page
