Need help?Do you have a question about the Emotiva BasX A-800 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Input Impedance | 22 kOhms |
| Gain | 29 dB |
| Damping Factor | > 500 |
| Type | Stereo Power Amplifier |
| THD | < 0.1% |
| THD+N (A-weighted) | < 0.1% |
| S/N Ratio (A-weighted) | > 115 dB |
| S/N Ratio | > 100 dB |
| Trigger | 12 VDC trigger input |
| Dimensions | 14.5" D |
| Power Supply | Toroidal transformer |
| Cooling | Convection cooled |
Controls amplifier power state; halo ring indicates status.
Houses status LEDs; can be disabled via rear panel switch.
Determines how the amplifier switches On/Off (On, Auto, Trigger).
Controls On/Off via trigger signal; provides 12VDC output.
Selects audio source for Zone: Bus Input or individual inputs.
Configures channels as stereo pair or single bridged channel.
Details RMS power output per channel and bridged.
Summary of front panel controls and their status indicators.
Addresses lack of power or indicator lights.
Troubleshoots issue where LEDs are off during operation.
Diagnoses audio issues with normal status indicators.
Identifies and resolves protect mode faults.
Addresses power-on issues with trigger or audio signals.
Diagnoses lack of audio when unit is powered on.
Solves issues with distorted or out-of-phase audio.
To Next Page
