Need help?Do you have a question about the Emotiva XPA-1 and is the answer not in the manual?
Guidelines for proper grounding and polarization to prevent electrical shock and signal interference.
Detailed description of the XPA-1 amplifier, its features, and applications.
Detailed description of the XPA-2 amplifier, its features, and applications.
Detailed description of the XPA-3 amplifier, its features, and applications.
Detailed description of the XPA-5 amplifier, its features, and applications.
Advice on electrical power requirements and socket capacity for amplifier operation.
Recommendations for optimal placement to ensure proper ventilation and heat dissipation.
How to connect speakers in series to the amplifier.
How to connect speakers in parallel to the amplifier.
Steps to diagnose and resolve issues with no audio output from speakers.
Troubleshooting steps for unexpected amplifier shutdowns or tripped circuit breakers.
Diagnosing and fixing issues related to poor bass response from speakers.
Resolving audible thumps when turning the amplifier on or off.
Identifying and eliminating hum or noise in speaker output.
Detailed technical specifications for the Emotiva XPA-1 amplifier.
Detailed technical specifications for the Emotiva XPA-2 amplifier.
Detailed technical specifications for the Emotiva XPA-3 amplifier.
Detailed technical specifications for the Emotiva XPA-5 amplifier.
General| Weight | 75 lbs |
|---|---|
| Damping Factor | > 500 |
| Power Output (4 Ohms) | 1000 Watts RMS |
| Frequency Response | 20 Hz to 20 kHz +/- 0.1 dB |
| Total Harmonic Distortion (THD) | <0.1% |
| Input Sensitivity | 1.5V |
| Dimensions | 17" wide x 8" high x 19" deep (without connectors) |
| Type | Monoblock Amplifier |
| Power Output (8 Ohms) | 500 Watts RMS |
To Next Page
