Need help?Do you have a question about the Emotiva XPA GEN3 and is the answer not in the manual?
General| Frequency Response | 20 Hz - 20 kHz (+/- 0.1 dB) |
|---|---|
| Gain | 29 dB |
| Damping Factor | > 500 |
| Power Output (8 Ohms) | 300W |
| THD+N | <0.1% |
| Signal to Noise Ratio | >100dB |
| Input Sensitivity | 1.5V |
| Dimensions | 17" wide x 8" high x 19" deep |
| Trigger | 12V trigger input and output |
Explains warning symbols and provides critical safety instructions for operation.
Covers power cord, modular component safety, and general handling precautions.
Describes the front panel's status LEDs, their meaning, and the standby button.
Details the status LEDs switch, trigger connections, circuit breaker, and AC power switch.
Explains the IEC power receptacle, circuit breaker reset, and covers for unoccupied slots.
Describes the unbalanced/balanced inputs, selector switch, and speaker binding posts on the module.
Details automatic voltage detection and the main AC power switch.
Provides solutions for common problems such as no output, no sound, or trigger failures.
To Next Page
