Need help?Do you have a question about the Emotiva XPS-1 and is the answer not in the manual?
Introduction to the Emotiva XPS-1 phono preamp, its design and capabilities.
Detailed instructions for connecting the XPS-1 to a turntable and other audio equipment.
Guidance on setting the MM/MC and impedance switches for optimal cartridge performance.
Technical specifications including input impedance, gain, frequency response, and SNR.
Solutions for common operational problems such as hum, noise, distortion, or no sound.
General| Type | Phono Preamplifier |
|---|---|
| Outputs | 1 x RCA |
| Gain (MM) | 40 dB |
| Gain (MC) | 60 dB |
| Input Impedance (MM) | 47 kOhms |
| Input Impedance (MC) | 100 Ohms |
| Output Impedance | 100 Ohms |
| Input Capacitance | 100 pF |
| Inputs | 1 x RCA (MM), 1 x RCA (MC) |
| Frequency Response | 20 Hz - 20 kHz |
| THD | <0.01% |
| THD+N (MM) | <0.01% |
| Signal-to-Noise Ratio (MM) | > 82 dB |
| Signal-to-Noise Ratio (MC) | >75 dB (A-weighted) |
| Power Supply | 12 VDC |
To Next Page
