Need help?Do you have a question about the Emotiva BasX TA1 and is the answer not in the manual?
General| Power Output (8 Ohms) | 50 Watts per channel |
|---|---|
| Signal-to-Noise Ratio | > 100 dB (A-weighted) |
| Phono Input | Yes (MM) |
| Input Impedance | 47 kOhms |
| Damping Factor | > 100 |
| Frequency Response | 20 Hz - 20 kHz |
| Analog Inputs | 3 (RCA) |
| Digital Inputs | 1 (Coaxial), 1 (Optical), 1 (USB) |
| Outputs | Speaker Outputs (Binding Posts) |
| Bluetooth | Yes |
| Input Sensitivity | 200 mV |
Provides warnings and explains symbols for safe installation and operation.
Basic steps to set up and begin using the PT1 or TA1.
Explains the Headphone Jack, Input Buttons, Power/Standby Button, Volume Knob, and Standby LED.
Covers Subwoofer, Crossover, Main Outputs, FM Antenna, and Digital Audio Inputs.
Covers subwoofer, crossover, main outputs, crossover switch, and FM antenna input.
Details Transmit LED, Power, Navigation, Menu, and Mute buttons.
Guides on unit startup, volume adjustment, and muting audio.
Details adjusting Bass, Treble, Balance, Dim, Reset, and Version settings.
Step-by-step guide for setting FM presets via the menu.
Covers digital audio and TA1 amplifier performance metrics.
Explains Emotiva's service options and items not covered.
Outlines claim process, shipping, and international warranty.
To Next Page