Need help?Do you have a question about the Emotiva ERC-1 and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Disc Compatibility | CD, CD-R, CD-RW |
| Frequency Response | 20 Hz - 20 kHz |
| THD+N | < 0.005% |
| Digital Outputs | Coaxial |
| Analog Outputs | RCA |
| Output Impedance | 100 Ohms |
| Power Supply | Internal linear power supply |
| Frequency Response Tolerance | ±0.5 dB |
Steps and contact information for obtaining repair service and RMA number.
List of items expected to be included with the ERC-1 CD Player.
Lists the compatible CD formats for the ERC-1 player.
Advice on how to properly hold CDs to avoid touching the playback surface.
Step-by-step instructions for inserting discs into the slot-loading system.
Warnings against forcing discs or inserting them incorrectly into the player.
Important precautions for handling discs to prevent damage or playback issues.
Recommendations for storing CDs properly to protect data integrity and prevent damage.
Function of the PLAY/PAUSE button for controlling disc playback.
Function of the PREVIOUS button to navigate tracks.
Function of the NEXT button to advance to the next track.
Function of the STOP button to halt disc playback.
Description of the display function for showing disc information.
Location for inserting CDs into the player.
Function of the STANDBY button to power the unit on/off.
Function of the EJECT button to remove the disc.
Description of balanced XLR outputs for connecting to audio equipment.
Description of RCA analog outputs for connecting to audio equipment.
Description of coaxial and optical digital outputs for audio signal transmission.
Function of the trigger input for synchronized power control.
Location of the fuse for protection and replacement.
The main power switch for the unit.
Information regarding the input voltage requirements.
The connection point for the power cord.
Function of the EJECT button on the remote control.
Function of the DIM button to adjust display and panel lighting.
Function of the STANDBY button to power the unit on/off.
Function of the PLAY/PAUSE button on the remote.
Function of the PREV button to navigate to the previous track.
Function of the REV button for backward search within a track.
Function of the FWD button for forward search within a track.
Function of the NEXT button to advance to the next track.
How to use numeric buttons to select specific tracks on the CD.
Function of the REPEAT button for repeating tracks or the entire disc.
Function of the A-B button for creating playback loops.
How to cycle through different display modes for track and disc timing.
Detailed procedure for inserting and removing CDs from the player.
Steps for setting up and playing a CD in normal mode.
Methods for finding and playing specific tracks on a CD.
Instructions for fast-forwarding or rewinding within a track.
How to set the player to repeat a single track or the entire disc.
To Next Page
