TECHNICAL SPECIFICATIONS
• Output voltage: 1V rms (7V peak)
• Channel separation: ≥95dB - ref. 1kHz
• Frequency response: 20Hz~20kHz (+/- 0.1dB)
• S/N: ≥100dB (A weighted）
• THD: ≤0.01％ 0dB 1KHz）
• Playback formats: Redbook CD, HDCD, MP3
• Digital Output Filter: 24-Bit, 384 times oversampling (Analog Devices 1955）
• Sampling Frequency: 44.1 kHz
• Analog output filter frequency: 80 kHz (-3dB)
• Amplitude output linearity: 0.2dB
• Phase linearity: 30°
• Power consumption: ≤ 25W
• Output connection types: digital coaxial, digital optical toslink, unbalanced RCA, balanced
XLR
• Weight: 17.5 lbs. (unboxed)
• Width: 17 inches
• Depth: 14 inches (including RCA jack extension)
• Height: 3.75 inches (faceplate only) – 4.25 inches including feet
• Feet are recessed 2.25 inches from face of unit, and .5 inches from back of unit
Analog Connections
The analog sections will use the DAC's in the player and pass an analog signal to the
pre/pro (receiver). Plug into the analog inputs of your pre/pro (receiver) to take advantage
of the processing in the ERC-1.
Digital Connections
The digital outputs (Toslink / Coaxial) will send a digital signal to your pre/pro (receiver)
allowing you to use the processing in your pre/pro (receiver).
All outputs (digital and analog) on the ERC-1 are active at all times.
10
To Next Page
