Emotiva X-Ref 12 - Quick Start Guide

Page 7
Quick Start
To get the most from your Emotiva X-Ref 12 DSP Powered Subwoofer, we strongly urge
you to read the entire manual. If you just can’t wait to hear how great your X-Ref 12
subwoofer sounds, this section will cover the basics you need to get started.
• Find a secure location for your X-Ref 12 DSP Powered Subwoofer.
• Plug your X-Ref 12 DSP Powered Subwoofer into a grounded AC electrical outlet. If
you use a different power cord or extension cord, use only a three-prong grounded
type with sufcient current rating.
• Connect your X-Ref 12 to the “subwoofer” or “LFE” output on your source
equipment (preamp or home theater pre/processor).
• Congure the bass management on your source equipment according to the
manufacturer’s instructions.
• Turn on the Power switch on the rear panel of the X-Ref 12.
• Enjoy the music.
While you’re enjoying your X-Ref 12 DSP Powered Subwoofer, it would be a great time
to read the rest of the manual to learn more about it.