Emotiva X-Ref 12 - Technical Specifications

Page 21
Specications
Driver complement:
(1) 12 inch long-throw woofer with die-cast frame, Butyl rubber surround, and
proprietary para-aramid blended ber cone
Amplierpower:
600 watts RMS; 1000 watts peak
Typical in-room frequency response:
20 Hz to 200 Hz
Typical in-room maximum sound output level:
115 - 118 dB SPL
Inputs:
One pair (stereo) unbalanced (RCA)
One professional balanced (XLR)
One 1/8” trigger input (for Movie EQ)
Output:
One professional balanced (XLR)
Nominal input sensitivity:
Balanced input: 1 V
Unbalanced inputs: 0.5 V
Phaseadjustment:
0 - 315 degrees (in 45 degree steps)
Low pass crossover (X-Over):
40 Hz - 150 Hz (in 1 Hz steps), Direct (at)
Parametric equalizers: EQ1, EQ2 (independent)
Center frequency: 25 Hz - 150 Hz (in 1 Hz steps)
Gain: -12 dB - +6 dB (in 1 dB steps)
Q: 0.5 - 5.0 (in 0.1 steps)
Input voltage:
90 VAC - 250 VAC 50/60 Hz; auto detecting
IEC standard removable power cord
Dimensions:
Unboxed: 15.625” high x 14.625” wide x 15.5” deep (including 1” high feet)
Weight:
Unboxed: 44 lbs.