Emotron VSA Series - Page 53

52 Programming instructions and menu list Emotron AB 01-3991-11r2
348
Jog frequency instruc-
tion
00.0 to 200 Hz 05.0 *1
Process and application parameters, Torque
351
Torque Boost Gain
(Vector)
001 to 450
352
Low frequency voltage
compensation
000 to 40
353 V/F Pattern setting 001 to 007 001/004
354
Slip Compensation
Gain (Vector)
001 to 450
355
Max output frequency
(Hz)
00.2 to 200 50.0/60.0
356
Output voltage ratio at
max frequency (%)
00.0 to 100 100
357 Mid frequency (Hz) 00.1 to 200 25.0/30.0
358
Output voltage ratio at
mid frequency (%)
00.0 to 100 50.0
359
Min output frequency
(Hz)
00.1 to 200 00.5/00.6
35A
Output voltage ratio at
Min frequency (%)
00.0 to 100 01.0
35B Torque boost gain (V/F) 00.0 to 30.0% 00.0 *1
35C
Slip Compensation
Gain (V/F)
00.0 to 100% 00.0 *1
Process and application parameters, Preset references
361
Frequency Up/ Down
control using MFIT
000: Up/Down command is available. Set
frequency is held when VSD stops.
001: Up/Down command is available. Set
frequency resets to 0Hz when VSD stops.
002: Up/Down command is available. Set
frequency is held when VSD stops. Up/
Down is available in stop.
000
362
Preset frequency 1
(Main frequency set-
ting)
00.0 to 200 Hz 05.0 *1
363 Preset frequency 2 00.0 to 200 Hz 05.0 *1
Ta bl e 2 3
Menu Function Description Range/ Code
Factory
Default
Remarks