- 17 -
Electrical Connection
Those ovens equipped with a three-pole cable are designed to operate with alternating current with the voltage
and frequency indicated on the data plate (located on the appliance) and in the instruction manual. The wire for
earthing the appliance is yellow-green in color.
Only connecting the power supply complying to the mark on the rating label, the oven could be used.
Notice：1、socket should be ground connection reliably
2、Voltage：220~240V
3、Frequency：50~60Hz
Connection with rigid pipe (cooper or steel)
Connection to the gas system must be made in such a way as not tot cause any stress of any kind on the appliance.
There is an adjustable L-shaped pipe fitting on the supply ramp to the appliance, whose watertightness is ensured
by a seal. Should you need to turn the pipe fitting, you must in all cases replace the seal (provided with the
To Next Page
Loading...
Need help?
General
