6. TECHNISCHE SPEZIFIKATIONEN EA1800D
CLASS-D MONO VERSTÄRKER
870W x 1 @ 4 Ohm (< 1.0% THD / 14.4V)
1600W x 1 @ 2 Ohm (< 1.0% THD / 14.4V)
2200W x 1 @ 1 Ohm (< 1.0% THD / 14.4V)
1 Ohm stabil
Full-MOS-FET Class-D Verstärker
Master / Slave Betrieb möglich
Variables Subsonicfilter, 10 – 60Hz mit 12dB/Okt.
Variables Tiefpassfilter, 30 – 300Hz mit 24dB/Okt.
Variabler Phase-Shift von 0 – 180°
Variable Eingangs-Empfindlichkeit von 0.3 – 7V
Dämpfungsfaktor an 4 Ohm: > 350
Signal-Rauschabstand: > 85dB
Externe Basspegel-Fernbedienung
50mm² Strom-Anschluss Terminals
Dimensionen BxHxT: 540 x 62 x 250mm
6. TECHNICAL SPECIFICATIONS EA1800D
CLASS-D MONO AMPLIFIER
870W x 1 @ 4 ohms (< 1.0% THD / 14.4V)
1600W x 1 @ 2 ohms (< 1.0% THD / 14.4V)
2200W x 1 @ 1 ohms (< 1.0% THD / 14.4V)
1 ohms stable
Full MOS-FET class-D amplification circuitry
Master / slave operation
Variable subsonic highpass filter, 10 – 60Hz with 12dB/oct.
Variable lowpass filter, 30 – 300Hz with 24dB/oct.
Fully variable phase-shift 0 – 180°
Variable input sensitivity: 0.3 – 7V
Damping factor @ 4 ohms: > 350
Signal to noise ratio: > 85dB
Remote low pass level remote control
50mm² direct power input terminals
Dimensions WxHxD: 540 x 62 x 250mm
To Next Page
Loading...
Need help?
General
