6
The Empire Digital Level Accuracy, Readability, Durability six
Digital sensor accuracY:
Horizontal & Vertical Position
Between +1 degree and -1 degree/ 89 degrees to 90 degrees digital sensor to be accurate
to + or - .05 degrees
All Other Positions
Digital sensor to be accurate to + or - .1 degree
Digital Sensor Temperature Range
Above mentioned accuracy is measured between 0 and 50 degrees C (32 and 122 degrees F)
Laser Module
Class II diode with a CAUTION label less than 1mW, 635-665nm
Laser dot no larger than 11/32” (8.6mm) at 50’ (15.24 meters)
Complies with 21CFR parts 1040.10 and 1040.11
MoDule sounDs :
Beep intervals indicates level position with shorter time between beeps as the level approaches true
level or plumb. Then a rapid 6 tones when in the 0 degree level position. Beeping begins within 1
degree of level or plumb.
warrantY
EMPIRE DIGITAL LASER LEVEL LIMITED ONE YEAR WARRANTY
This Empire Digital Laser Level is warranted to be free from imperfections in materials and workmanship. It is an electronic tool with sensitive
digital and laser components thus susceptible to damage from shock. Protect this level in the case provided and do not drop the tool. Damage
caused by shock is not covered by the warranty. If the level fails under normal use, contact Empire directly for repair or replacement within 1 year
of your original date of purchase. Bent frames or broken/cracked components are the result of undue shock and void the warranty.
To Next Page
Loading...