EasyManua.ls Logo

Empress Effects Reverb - User Manual

Empress Effects Reverb
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
user manual
version 4.01
Question and Answer IconNeed help?

Do you have a question about the Empress Effects Reverb and is the answer not in the manual?

Summary

INTRODUCTION

Pedal Introduction and Philosophy

Overview of the Empress Reverb's design goals, features, and user interaction.

QUICKSTART GUIDE

Initial Mode Settings

Recommended knob settings for Concert Hall, Modulated, and Ghost reverb modes.

Additional Mode Settings

Recommended knob settings for Room, Delay+Reverb, and Reverse reverb modes.

MODE REFERENCE CHART

Hall, Plate, Spring, Room Modes

Descriptions of Hall, Plate, Spring, and Room reverb effects and their parameters.

Sparkle, Modulation, Ambient Swell

Descriptions of Sparkle, Modulation, and Ambient Swell reverb effects and their parameters.

Delay+Reverb and Reverse Modes

Descriptions of Delay+Reverb and Reverse reverb effects and their parameters.

Ghost, Lo-Fi, and Beer Modes

Descriptions of Ghost, Lo-Fi, and Beer reverb effects and their parameters.

FIRMWARE UPDATES

Performing a Firmware Update

Step-by-step guide to updating the pedal's firmware using an SD card.

SD Card and Error Codes

Constraints for SD cards and common firmware update error codes.

PRESET MANAGEMENT

Scrolling Preset System

Details on organizing, recalling, and managing presets via the scrolling system.

Saving and Recalling Presets

Instructions for saving current settings and loading saved presets.

BANK PRESET SYSTEM

Bank Preset System Operations

How to recall, bypass, change banks, and save presets using the bank system.

CONTROLS OVERVIEW

Mode Selector and Tone Controls

Explains mode selection and EQ/damping adjustments via knobs.

Preset Management Functions

Details saving presets and mapping expression pedals.

Core Knob and Switch Functions

Describes decay, mix, output, scroll, and bypass controls.

Variable Controls (Thing 1 & Thing 2)

Details the dynamic functions of Thing 1 and Thing 2 knobs per mode.

CONTROL PORT

Expression Pedal Configuration

Details how to assign and control parameters using an expression pedal.

CONTROL VOLTAGE (CV)

CV Input Operation

Explains how the pedal responds to CV signals from 0-5 volts.

EXTERNAL TAP SWITCH

External Switch Compatibility

Describes the compatibility and function of external tap switches.

MIDI CONTROL

MIDI Integration Overview

Explains MIDI control, presets, and tempo synchronization.

MIDI Preset Recall and Output

Details using MIDI for preset recall and sending preset data.

MIDI Clock and Control Messages

Covers MIDI clock sync and control change parameter mapping.

POWERING THE REVERB

Power Supply Requirements

Information on compatible power supplies and current requirements.

ADVANCED CONFIGURATION

Entering and Exiting Configuration

Steps to access, use, and leave advanced configuration.

Configuration Options Reference

Details on various pedal settings adjustable via advanced configuration.

FACTORY RESET

Factory Reset Procedure

Instructions for restoring the pedal to its default factory settings.

LEGAL STUFF

FCC Compliance

Details on the equipment's compliance with FCC regulations.

SPECIFICATIONS

Technical Specifications

Comprehensive list of technical specifications for the pedal.

Empress Effects Reverb Specifications

General IconGeneral
BrandEmpress Effects
ModelReverb
CategoryMusic Pedal
LanguageEnglish

Related product manuals