PRESETS
The Reverb has two types of preset systems: the scrolling
preset system, and the bank preset system. Read about each
preset system to find which one will work best for you. Select
which preset system to use in Advanced Configuration.
SCROLLING PRESET SYSTEM
Preset Organization
In Advanced Configuration you can select the number of
presets you wish to use. The presets are represented by a
series of 5 LEDs located just below the knobs. Press the scroll
stompswitch to scroll through the presets. The preset LEDs will
blink. When cycling through the presets after every 5 presets,
the preset LED colors will change to another color to indicate
you're in the next bank and will start counting again from left
to right.
When cycling through the presets you will notice that after
your final preset, all the preset LEDs will flash very quickly. This
represents the manual preset. If you recall this preset, the
Reverb will get its settings from the current knob positions. In
the manual preset, no preset LEDs are lit.
You can scroll backwards through the presets by pressing the
select and scroll stompswitches simultaneously.
To Next Page
Loading...
