EMS FirePoint 5000 Communications Guide

EMS 5000 FIREPOINT
©2015 EMS Security Group Ltd. All rights reserved. TSD234 Iss 3 25/06/15 AJM
13
10 Press the “” button until the screen displays:
11 Press the “YES” key. The screen will now display:
12 Press the “” button until the screen displays:
13 Press the “YES” key. The screen will now display:
14 Press the “1” key, followed by the “YES” key. The
screen will now display:
15 Press the “” button until the screen displays:
16 Press the “YES” key. The screen will now display:
17 Press 384 then press the “YES” key. The screen will
now display:
18 Press the “NO” key. The screen will now display:
19 Press the “” button until the screen displays:
20 Press the “YES” key. The screen will now display:
| Re-online Device |
> Bus Master Setup<
| Bus Remote Setup|
Yes= Select Time
| * Master Setup *|
> Polling Baudrate <
| Auto Re-online |
Yes= Select Time
|* Auto Re-online *|
> Port to use <
| ^^^^^^^^^^^^^ |
Yes= Select Time
Master Port = 0
0 = Off, 1 = RS485
2 = PAGER 232> _
Yes= Select Time
|* Auto Re-online *|
> Port to use <
| ^^^^^^^^^^^^^ |
Yes= Select Time
|* Master Setup *|
> Polling Baudrate <
| Auto Re-online |
Yes= Select Time
Polling Baud
Is 384, enter rate
(Max 768): _
Yes= Select Time
|* Master Setup *|
> Polling Baudrate <
| Auto Re-online |
Yes= Select Time
| Re-online Device |
> Bus Master Setup<
| Bus Remote Setup|
Yes= Select Time
| Bus Master Setup |
>Bus Remote Setup<
| Pager232 Redir’ |
Yes= Select Time
| * Remote Setup * |
> Reply Baudrate <
| Port to use |
Yes= Select Time

EMS FirePoint 5000 Specifications

General

Brand	EMS
Model	FirePoint 5000
Category	Control Panel
Language	English