EMSI EMS-5000 - Instructions for Use; Insert Pin into Electrode Socket; Adjusting the Controls

4. Attached Electrodes. Be sure that all sides are well taped
and that the reusable electrodes is held firmly against the-skin.
0
5. Electrode Lead Wires. Output Plug: (plugs into output
receptacle) Pin Connectors: (Plug into electrodes)
INSTRUCTIONS FOR USE
6. Insert Pin into Electrode Socket. Insert pin connector into
electrode as shown. (When inserting or removing pin connector,
hold connector-not cord-to protect cord.) For some electrode
locations, it may be preferable to insert the pin connector prior
to taping the electrode to the skin.
7. Adjusting the Controls. Ensure that amplitude controls for
both Channels 1 and 2 are turned to the "OFF" position.
(D
iL