Emtek CF 2.0 - Trim Installation and Final Checks; Step 6 C: Slide Lever;Knob onto Spindle; Step 6 D: Tighten Set Screw; Step 6 E: Repeat and Test Functionality

4
English
6. Install the Trims Connued
Step 6E: Repeat steps 6A-6D for opposite side.  


For emergency, insert a nail type object into
the release hole of the exterior rosee to open
the lock.
Step 6D: 

Step 6C: 
Tighten set screw using provided hex torque
wrench unl wrench touches the plasc
indicator as shown.
!
!
!
!