EMW EVB-A100 - Device Menu; 5.1 How to connect Rx with PC; 5.3 How to connect Tx with PC

- 17 -
EMW Co., Ltd.
EVB
-
A100
User
Manual
5. Device Menu
Describes how to set up Rx and Tx devices and how to connect two devices.
5.1 How to connect Rx with PC
 Connect the power and LAN cable to Rx.
 Connect Rx’s LAN cable to the PC’s LAN port.
 Check the PC’s IPv4 address.
 The PC should have the same IP address as Rx. Refer to Chapter 4.
 Enter the address of the product into the browser’s address box and move to the
login screen.
 Username / Password
Input admin/admin account to log in.
5.2 Account type
If logged in with the admin account, Tx (client) does not support WDS & MBSS.
5.3 How to connect Tx with PC
 Connect the power and LAN cable to Tx.
 Connect Tx’s LAN cable to the PC’s LAN port.
 Check the PC’s IPv4 address.
 The PC should have the same IP address as Tx. Refer to Chapter 4.
 Enter the address of the product into the browser’s address box and move to the
login screen.
 Username / Password
Input admin/admin account to log in.