Enco Control - Page 12

ENCO Control
Technical description
•Kulautuvos g. 45a , LT-47190 Kaunas •Tel. (+370 37) 360234 •Faks. (+370 37) 360358 •info@axis.lt • www.axis.lt
12
3.1.4. Interf.
1. Mbus[0]
2. CL[0]
3. Inv.CL[0]
4. RS-232[0]
5. RS-232[1]
6. RS-485[1]
7. Waveport
Select data transfer rate. It should be the same as stated on readout device settings:
3.1.5. Baud rate
1. 300
2. 600
3. 1200
4. 2400
5. 4800
6. 9600
7. 19200
8. 38400
9.56700
10.115200
Set up parity. It should be the same as stated on readout device settings:
3.1.6. Parity
1. None
2. Odd
3. Even
4. Mark
5. Space
Select database (data archive), wherein will be stored data, collected from an external device:
3.1.7. Array
1. 0
2. 1
3. 2
4. 3
Set up device address or number (depending what applicable):
DHWAddr|ID
Yes No
254
Meter reading period:
DHWPeriod
Yes No
3600
3.1.10. Module data
1. Module Idle
2. Slaves found 12
Field
Description
1. Module
2. Slaves found
Displays the number of connected to the interface and scanned devices