Enco Control - Page 7

ENCO Control
Technical description
•Kulautuvos g. 45a , LT-47190 Kaunas •Tel. (+370 37) 360234 •Faks. (+370 37) 360358 •info@axis.lt • www.axis.lt
7
Main meniu
1. HVAC
2. General settings
3. Modules
4. Receivers
5. Temper. Sensors
6. Outputs/Inputs
7. Connection state
8. Set date & time
9. Lock configuration
Field
Description
1. HVAC
Settings for regulation of HVAC circuit
2.General
settings
Information about general device settings
3.Modules
Settings for reading external devices (meters)
4.Receivers
Settings for clear channel of communication
5. Temper.
Sensors
Review and control of Status of temperature sensors connected to the
controller
6.Outputs/Inputs
Review and control of status of Outputs/Inputs
7.Connection
state
Status of communication systems
8.Set date & time
Setting up date and time
9.Lock
configuration
Lock possibility of configuration
1. HVAC system type selection
The controller is capable of controlling different HVAC systems (circuits).
1. HVAC
1.HVAC - - -
2.HVAC - - -
3.HVAC - - -
1.1. HVAC settings
1.HVAC type - - -
1.1.1. HVAC type
1. - - -
2. DHW
3. HEAT
4. VENT
Field
Description
1. - - -
Circuit is off
2.DHW
Hot water preparation circuit
3.HEAT
Heating control circuit
4.VENT
Ventilation control circuit
After selecting the type of desired system (circuit), click "OK" to return to the previous menu,
and when you return to the previous menu in the box that appears confirm you choice:
DHW
Yes No
In the same way, select all desired types of HVAC systems: