Advanced Setting
This page contains configurations for advanced users, which the change reflects the
wireless performance and operating modes.
Beacon Interval: To set the period of time in milliseconds that AP sends out a
beacon. Default is 100 milliseconds.
RTS Threshold: To set the size of RTS/CTS packet size. Default is 2432 bytes.
Fragmentation Threshold: To set the number of bytes used for the fragmentation
boundary for directed messages. Default is 2436 bytes.
DTIM Interval: This value indicates the interval of the Delivery Traffic Indication
Message (DTIM). A DTIM field is a countdown field informing clients of the next
window for listening to broadcast and multicast messages. When the access point
has buffered broadcast or multicast messages for associated clients, it sends the
next DTIM with a DTIM interval value. Access point clients hear the beacons and
awaken to receive the broadcast and multicast messages.
SSID Broadcast: While SSID Broadcast is enabled, all wireless clients will be able
to communicate with the access point. For secure purpose, user may want to disable
SSID broadcast to allow only those wireless clients with the AP SSID to
communicate with the access point.
Mode Setting: To setting the AP operation mode for 802.11g only or
802.11b/802.11g mix mode
TX Rates: Select one of the wireless communications transfer rates, measured in
megabytes per second, based upon the speed of wireless adapters connected to the
WLAN.
25
To Next Page
Loading...
Need help?
General
