Pool Series & Spa Series Winterizaon Service Instrucon
Endless Pools D90010_en 1122
1
Overview:
A pool le inacve during the winter months is suscepble to damage from freezing water. The purpose of winterizing
the pool is to ensure that the PVC plumbing lines and water quality components (pump, lter, heater, UV, etc.) do not
sustain freeze damage over the winter months. Each pool may potenally have a dierent equipment conguraon
and site condions vary, but the concepts are sll the same. The overall goal is to isolate the water in the pool from the
plumbing systems and then remove all of the water from these lines.
Depending on the pool design, removing a large volume of water from the pool is not recommended or necessary. In
most cases, gravity will suce to rid the pipes of water, although in some instances, a wet/dry vacuum or a small air
compressor with a quick coupler ng may be necessary to ush out the lines. When using a compressor, take care not
to exceed 10 psi in the system.
Table of Contents
Winterizing Endless Pools Original Series and WaterWell ..........................2
Winterizing Endless Pools StreamLine ..........................................4
Winterizing Endless Pools Spa Series ...........................................5
Winterizing Endless Pools Fiberglass Pool .......................................7
It is imperative that a pool be properly winterized if it will be susceptible to freezing
temperatures. The pool and its components will be damaged if it is not done properly.
The following covers all but the most unique of installations.
Freeze damage is NOT covered under warranty. Endless Pools is not responsible for
damage to the pool or its components as a result of freezing temperatures.
The best way to ensure that the pool is properly winterized is to employ a local Pool/
Spa professional to perform the winterization procedure.
NOTICE
To Next Page
Need help?
General
