Endress+Hauser Analytik Jena Biometra TRIO - Table of Contents

Biometra TRIO Table of contents
3
Table of contents
1 Basic information ................................................................................................................................................. 5
1.1 About this manual ............................................................................................................................................ 5
1.2 Intended use ..................................................................................................................................................... 6
2 Security ................................................................................................................................................................. 7
2.1 Safety labeling on the device ........................................................................................................................... 7
2.2 Requirements for the operating personnel..................................................................................................... 8
2.3 Safety instructions for transport and commissioning..................................................................................... 8
2.4 Safety instructions: during operation .............................................................................................................. 8
2.4.1 Summary of safety instructions ....................................................................................................................... 8
2.4.2 Safety instructions – protection against explosion and fire........................................................................... 9
2.4.3 Safety instructions – electrical equipment ...................................................................................................... 9
2.4.4 Handling hazardous substances ...................................................................................................................... 10
2.5 Safety instructions–maintenance and repair ................................................................................................ 10
2.6 Behavior during emergencies .......................................................................................................................... 11
3 Installation and commissioning ........................................................................................................................... 12
3.1 Installation conditions...................................................................................................................................... 12
3.1.1 Ambient conditions .......................................................................................................................................... 12
3.1.2 Power supply..................................................................................................................................................... 12
3.2 Unpacking and setting up the device............................................................................................................... 12
3.3 Setting the operating voltage .......................................................................................................................... 13
3.4 Opening and closing the device....................................................................................................................... 14
4 Operation.............................................................................................................................................................. 16