Endress+Hauser iTHERM TM411 - Page 36

iTHERM TM412
36 Endress+Hauser
Weld-in adapter for FTL50
ø50 (2.0)
ø53 (2.1)
47.8 (1.9)
24.6 (1.0)
30°
21 (0.8)
ø41 (1.6)
G 1"
ISO 228
A0011927
G1", d=53 mm, without flange
Material: 316L
Roughness in μm (μin): 0.8 (31.5)
Order number: 71093129 (with inspection certificate EN10204-3.1
material)
Order number seal (5-pc. set): silicone O-ring 52014472
1)
, FDA-
compliant
1) A seal is included in the delivery.
Weld-in adapter for FTL50
ø41 (1.6)
G 1"
ISO 228
ø60 (2.4)
29.6 (1.2)
24.6 (1.0)
A0008267
G1", d=60 mm, with flange
Material: 316L
Roughness in μm (μin): 0.8 (31.5)
Order number: 52001051 (without inspection certificate EN10204-3.1
material)
Order number: 52011896 (with inspection certificate EN10204-3.1
material)
Order number seal (5-pc. set): silicone O-ring 52014472
1)
, FDA-
compliant
With EHEDG certification and 3-A symbol
1) A seal is included in the delivery.
Weld-in adapter for FTL50
26 (1.02)
5 (0.2)
ø65 (2.56)
A0008272
G1", can be aligned
Material: 316L
Roughness in μm (μin): 0.8 (31.5)
Order number: 52001221 (without inspection certificate EN10204-3.1
material)
Order number: 52011898 (with inspection certificate EN10204-3.1
material)
Order number seal (5-pc. set): silicone O-ring 52014424
1)
, FDA-
compliant
1) A seal is included in the delivery.