Endress+Hauser iTHERM TM411 - Device-Specific Accessories

iTHERM TM412
Endress+Hauser 35
Accessories
Various accessories, which can be ordered with the device or subsequently from Endress+Hauser, are
available for the device. Detailed information on the order code in question is available from your
local Endress+Hauser sales center or on the product page of the Endress+Hauser website:
www.endress.com.
Device-specific accessories
Weld-in adapter for FTL31/33/20
ø
26 (1.0)
25 (1.0)
ø
29 (1.1)
30 (1.2)
G
ISO 228
¾"
ø32 (1.3)
A0008265
G¾", d=29 mm, without flange
Material: 316L
Roughness in μm (μin): 1.5 (59.1)
Order number: 52028295 (with inspection certificate EN10204-3.1
material)
Order number seal (5-pc. set): silicone O-ring 52021717
1)
, FDA-
compliant
1) A seal is included in the delivery.
Weld-in adapter for FTL31/33/20
ø
50 (2.0)
26 (1.0)
21 (0.8)
ø
32 (1.3)
G ¾
ISO 228
"
A0008810
G¾", d=50 mm, with flange
Material: 316L
Roughness in μm (μin): 0.8 (31.5)
Order number: 52018765 (with inspection certificate EN10204-3.1
material)
Order number seal (5-pc. set): silicone O-ring 52021717
1)
, FDA-
compliant
With EHEDG certification and 3-A symbol
1) A seal is included in the delivery.
Weld-in adapter for FTL50
26 (1.0)
ø
55 (2.2)
21 (0.8)
ø
32 (1.3)
G ¾
ISO 228
"
A0008274
G¾", d=55 mm, with flange
Material: 316L
Roughness in μm (μin): 0.8 (31.5)
Order number: 52001052 (without inspection certificate EN10204-3.1
material)
Order number: 52011897 (with inspection certificate EN10204-3.1
material)
Order number seal (5-pc. set): silicone O-ring 52014473
1)
, FDA-
compliant
With EHEDG certification and 3-A symbol
1) A seal is included in the delivery.