iTHERM TM412
38 Endress+Hauser
Service-specific accessories
Accessories Description
Applicator Software for selecting and sizing Endress+Hauser measuring devices:
• Calculation of all the necessary data for identifying the optimum measuring
device: e.g. pressure loss, accuracy or process connections.
• Graphic illustration of the calculation results
Administration, documentation and access to all project-related data and
parameters over the entire life cycle of a project.
Applicator is available:
• Via the Internet: https://wapps.endress.com/applicator
• On CD-ROM for local PC installation.
Konfigurator
+Temperatur
Software for selecting and configuring the product depending on the measuring
task, supported by graphics. Includes a comprehensive knowledge database and
calculation tools:
• For temperature competence
• Quick and easy design and sizing of temperature measuring points
• Ideal measuring point design and sizing to suit the processes and needs of a wide
range of industries
The Konfigurator is available:
On request from your Endress+Hauser sales office on a CD-ROM for local PC
installation.
W@M Life cycle management for your plant
W@M supports you with a wide range of software applications over the entire
process: from planning and procurement, to the installation, commissioning and
operation of the measuring devices. All the relevant device information, such as
the device status, spare parts and device-specific documentation, is available for
every device over the entire life cycle.
The application already contains the data of your Endress+Hauser device. Endress
+Hauser also takes care of maintaining and updating the data records.
W@M is available:
• Via the Internet: www.endress.com/lifecyclemanagement
• On CD-ROM for local PC installation.
DeviceCare SFE100 The fastest way to configure Endress+Hauser field devices is by using the dedicated
tool DeviceCare. User-centered design allows for transparent and intuitive device
connection and configuration.
For details, see Technical Information TI01134S and Operating Instructions
KA01303S and BA00027S
FieldCare SFE500 FieldCare is Endress+Hauser's universal tool for configuring field devices that
provides a range of functionality from device parameterization to engineered
Condition Monitoring solutions.
For details, see Technical Information TI00028S and Operating Instructions
KA01303S, BA00027S and BA00065S
System components
Accessories Description
Display RIA15 It is integrated in the 4 to 20 mA or HART® loop and transmits the measuring
signal or HART® process variables in digital form. The process display unit does not
require an external power supply. It is powered directly from the current loop.
For details, see the "Technical Information" document TI01043K
Memograph M, RSG45 Advanced Data Manager with tamper-proof data storage and access (FDA 21 CFR
11) HART® gateway functionality; Up to 40 HART® devices connected at a time
Communication capabilities: Modbus, Profibus DP, PROFINET, EtherNet/IP.
For details, see the "Technical Information" document TI01180R
To Next Page
Loading...