Endress+Hauser iTHERM TM411 - Input; Measured Variable; Measuring Range; Output

iTHERM TM412
6 Endress+Hauser
Design Options
6: Thermowell • Various diameters
• Various tip shapes (straight or reduced)
7: Insert
→  23
Sensor models: wire wound (WW) or thin-film sensor (TF).

Your benefits:
• iTHERM QuickSens - insert with the world's fastest response
time:
– Insert: 3 mm (0.12 in) or 6 mm (0.24 in)
– Fast, highly accurate measurements, delivering maximum
process safety and control
– Quality and cost optimization
– Minimization of necessary immersion length: better product
protection thanks to improved process flow
• iTHERM StrongSens - insert with unbeatable durability:
– Vibration resistance > 60g: lower life cycle costs thanks to
longer operating life and high plant availability
– Automated, traceable production: top quality and maximum
process safety
– High long-term stability: reliable measured values and high
level of system safety
Input
Measured variable
Temperature (temperature-linear transmission behavior)
Measuring range
Depends on the type of sensor used
Sensor type Measuring range
Pt100 thin-film –50 to +200 °C (–58 to +392 °F)
Pt100 thin-film, iTHERM
StrongSens, vibration-
resistant > 60g
–50 to +500 °C (–58 to +932 °F)
Pt100 thin-film, iTHERM
QuickSens, fast-response
–50 to +200 °C (–58 to +392 °F)
Pt100 wire wound, extended
measuring range
–200 to +600 °C (–328 to +1 112 °F)
Output
Output signal
Generally, the measured value can be transmitted in one of two ways:
• Directly-wired sensors - sensor measured values forwarded without a transmitter.
• Via all common protocols by selecting an appropriate Endress+Hauser iTEMP temperature
transmitter. All the transmitters listed below are mounted directly in the terminal head and wired
with the sensory mechanism.
Family of temperature
transmitters
Thermometers fitted with iTEMP transmitters are an installation-ready complete solution to
improve temperature measurement by significantly increasing accuracy and reliability, when
compared to direct wired sensors, as well as reducing both wiring and maintenance costs.
PC programmable head transmitters
They offer a high degree of flexibility, thereby supporting universal application with low inventory
storage. The iTEMP transmitters can be configured quickly and easily at a PC. Endress+Hauser offers
free configuration software which can be downloaded from the Endress+Hauser Website. More
information can be found in the Technical Information. →  39