Safety instructions Micropilot FMR51, FMR57
2
1 Safety instructions
1.1 Designated use
The horn protection is a retrofitting part for Micropilot FMR51 and FMR57 level
measurement devices.
1.2 Installation and commissioning
1.2.1 Authorised personnel
All operations described in this mounting instructions manual must be carried out only by
trained specialist personnel authorised by the operator. During work on and with the device
the required personal protection equipment must always be worn.
1.2.2 Warning about misuse
Inappropriate or incorrect use of the instrument can give rise to application-specific hazards,
e.g. vessel overfill or damage to system components through incorrect mounting or
adjustment.
1.3 Operational safety
1.3.1 General safety instructions
The safety information in the operating instructions of the respective sensor must be
observed.
1.3.2 Hazardous areas
• in gas explosion hazardous areas
• in dust explosion hazardous areas (apparatus group IIIC)
NOTICE
Danger of explosion
‣
In gas explosion hazardous areas: Avoid electrostatic charging (e.g. through friction,
cleaning, maintenance, strong medium flow).
To Next Page
Loading...
