Calculations Tankvision
48 Endress+Hauser
NXA82x_Sediment-Water
REF_TEMP = default 15 °C
REF_TEMP will be set from the Reference Temperature setting from the VCF setting (see
figure below: Reference Temperature setting used as calculation input). Standard is equal to
15 °C. To change the reference condition to 20 °C, select the Alternate setting, which shall
be the new REF_TEMP.
NXA82x_VCF
System Integration
The selection when to use the HTG method to calculate the mass is placed in the product
settings in the sub section Mass & Weight. In the Liquid Mass (Mass in Vacuum)
Calculation Method dropdown menu you can find an entry called HTG Mode.
NXA82x_Mass-Weight
To Next Page
Loading...
