Tankvision Identifying the components
Endress+Hauser 9
4.2 Tank Scanner NXA820
• The Tank Scanner NXA820 connects multiple tank gauges:
from up to 15 tanks via one field-loop. The Tank Scanner NXA820 supports different field
protocols (Modbus EIA485, Sakura V1, Whessoe WM550).
• The measured values are transmitted by the network and visualized on HTML pages.
• The Tank Scanner NXA820 can be used stand-alone for small tank farms, but also be
integrated into a large system for use in refineries.
• The Tank Scanner NXA820 is equipped with a full set of tank inventory calculations. The
calculations are based on various international standards such as API, ASTM, IP and many
others. Measured values are used to calculate volume and mass.
4.2.1 Ordering information
Detailed ordering information is available from the following sources:
• In the Product Configuration on the Endress+Hauser website: www.endress.com → Select
country → Instruments → Select device → Product page function: Configure this product
• From your Endress+Hauser Sales Center: www.endress.com/worldwide
Product Configurator - the tool for individual product configuration
• Up-to-the-minute configuration data
• Depending on the device: Direct input of measuring point-specific information such as
measuring range or operating language
• Automatic verification of exclusion criteria
• Automatic creation of the order code and its breakdown in PDF or Excel output format
• Ability to order directly in the Endress+Hauser Online Shop
4.2.2 Product picture
L00-NXA8xxxx-10-08-06-xx-002
To Next Page
Loading...
