Endress+Hauser Tankvision NXA820 - 7.2.4 NXA820 Specific Settings

Tankvision configuration
32
7 Tankvision configuration
7.1 Network configuration
To integrate a Tankvision unit (i.e. a Tank Scanner NXA820, Data Concentrator NXA821 or Host
Link NXA822) into the network, proceed as follows:
1. Connect a laptop to the service port of the Tankvision unit. Make sure that the laptop is
configured to get a dynamic IP addresses from a DHCP server.
L00-NXA82xxx-04-00-00-yy-025
2. Open the internet browser and enter the following URL:
http://192.168.1.1
The Tankvision login screen appears.
23
1
6
7
8
W&M
RESET
RESET
Alarm Relay
E
L+
L-
6
7
8
3
2
1
Fuse
POWER
10,5 ... 32V DC
2AT
10 11 12 13
10 11 12 13
MODBUS