63
WARNING!
Personal injury or material damage possible due to loss of the bike carrier
during the journey.
Riding with a bike carrier which is extended can result in detachment of
the carrier or the coupling.
• Slide the carrier forwards before the start of the journey (see fig. 5 of
this chapter).
• The sliding mechanism locks back (you hear two clicks) by sliding back
the entire bicycle carrier. Both levers are in the low position (see figure
6).
• Check that the bike carrier is properly secured in this position.
DISMANTLING THE BIKE CARRIER
To dismantle the bike carrier, proceed in the reverse order to fitting:
Unlock the U-tube and rearlights and fold it down into the storage position.
Fold the bike carrier together.
Remove lighting connector from the car.
Release the quick-connector lever and pull the bike carrier of the towball.
The ingenious folding system makes it convenient to carry and to store.
To Next Page
Loading...
