EasyManua.ls Logo

Enel X JuiceRouter - Welcome; Package Contents; Additional Required Parts; Power over Ethernet Cable

Enel X JuiceRouter
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Welcome
Welcome to JuiceRouter! JuiceRouter is a cellular hotspot that allows you to create your own WiFi
network to get your JuiceNet devices online.
Package Contents
> JuiceRouter
> RJ-45 Gland
> Passive Power over Ethernet (PoE) 24V injector
> Wall transformer (with US plug)
> U-bolts (x2) for pole installation
NOTE
Supply your own fasteners if installing JuiceRouter onto a wall.
Additional Required Pas
Power Over Ethernet Cable
An RJ-45 Ethernet cable is required to power the JuiceRouter through the Power over
Ethernet (PoE) injector. Ensure that the cable is long enough to connect the JuiceRouter
Router to the power supply when the power supply is plugged in. The maximum cable
length is 100 m (328 ft).
In nearly all cases, a standard Ethernet cable is sucient.
However, if using a custom cable, ensure that the RJ-45 connector conforms to TIA/EIA-
568, T568B: