Energetics CT 350 - Assembly Instructions; Step 1: Stabilizer Assembly; Step 2: Pedal Installation

8
Assembly instruction
Step 1
Assemble the front stabilizer (12) onto the frame (67) using bolt (14) and flat washers (9).
IMPORTANT: make sure that the transport rollers of front stabilizer face front, not face to back.
Assemble the rear stabilizer (13) onto the main frame (67) using bolts (14) and flat washers (9).
IMPORTANT: you can adjust the height by screwing the knob (16).
Step 2
Screw the right pedal (11R) to the right pedal crank (20R) in anti-clockwise direction; screw the left
pedal (11L) to the left crank (20L) in clockwise direction.
14
12
14
9
9
13
11R
11L
20R