25/36
Alarm
code
Problem Charge
stop?
Cause Action
09 Mismatch
voltage
Yes There are problems in the voltage
circuit
Turn the high frequency charger off,
wait 5 seconds and turn the high
frequency charger back on.
If the problem persists, contact your
dealer.
10 Timeout
Temporary
End of the first phase as a result of
a time-out
Check if the high frequency charger
is suitable for the specified battery
type – disconnect the battery.
11 Overdischarge No The battery is over-discharged Your battery needs to be
regenerated. Please contact your
dealer.
12 Deep discharge No There's a deeply discharged battery Please contact your dealer
13 Connection
fault
Temporary
There is a connection error in the
output cables
Disconnect the battery and wait for
the display to show three dots on
the LED screen before connecting a
new battery
14 Pump mistake No The air pump is malfunctioning Please contact your dealer
15 Th. Sensor ko No There is a thermal disturbance in
the sensor
Please contact your dealer
16 Logic failure #2
Temporary
There is a decrease in voltage The high frequency charger restarts
after 3 seconds. If the problem
persists, contact your dealer.
17 Flash checksum Yes An error has occurred in the flash
memory
Turn the high frequency charger
off, wait 5 seconds and turn the
charger back on.
If the problem persists, contact your
dealer.
18 EEPROM ko Yes A problem has occurred in the
EEPROM communication
Turn the high frequency charger
off, wait 5 seconds and turn the
charger back on.
If the problem persists, contact your
dealer.
21 Logic failure #3 Yes The output voltage has exceeded
the safety threshold
Turn the high frequency charger
off, wait 5 seconds and turn the
charger back on.
If the problem persists, contact your
dealer.
29 Clock battery
off
No The clock battery is discharged or
removed
Please contact your dealer
30 Node reset Yes The CAN Node has been set to 126,
which is the reset value
The high frequency charger will
force you to enter the ‘Changing
settings’ again
When none of the problems or solutions were helpful, please contact your local dealer or the
manufacturer.
To Next Page
Loading...
