22
4.4 Using an EZV series generator with your Devices
After starting your generator you can connect your devices to it. Before starting, make
sure that you know what you are able to power with your Generator. Here's how you
can find out: Add the watt ratings of all the loads that the generator set will be powering
at the same time. Make sure that total wattage will not exceed the generator rating.
For example: A generator set rated 5000W can power two 1500W heaters, a 900W
circular saw, a 500W drill and a 100W light at the same time (4500W combined).
However, to operate a second 900W saw, it will be necessary to disconnect one of the
1500W heaters.
1. Turn off all devices before connecting them to your
generator.
2. Insert the plug of the device into your generator
based on its voltage requirements. Your EZV series
generator includes two 120V AC outlets, one 5V USB
outlet, and one 12V DC outlet for charging automotive
batteries. See Section 4.5 before using the DC outlet.
3. You can now turn your devices on and use them.
4.5 Using an EZV series generator to Charge Automotive Batteries
You can use 12V 8.3A DC output to charge automotive batteries. Be sure to
monitor the battery charge time. Overcharging may cause explosion, injury, and
damage to the generator.
To Next Page
Loading...
