3
• Barns, Kennels
& Stables
• Photo Labs &
Salons
• Day Care
Centers
• Chemical Odors
• Bowling Alleys &
Parlors
5. INSTALLATION
1. Remove unit from shipping carton.
2. Remove all protective materials.
3. Check for shipping damage and loose or broken parts.
4. Read Owner’s Manual thoroughly prior to installation.
5. Fully insert cord into the power cord receptacle on the back of the unit.
6. Determine placement location for the unit (page 6), plug the unit into a
120 volt outlet. Make sure the power switch is on, and adjust controls
according to the application.
6. BACK COVER & HEPA FILTER, CARBON FILTER REMOVAL
Step 1: Unplug the LB-444 to prevent
electric shock when you want to wash or
maintain the unit.
To Next Page
Loading...
