4
Step1
Step 2: Push the two latches down on the back cover.
Step 3: Remove the HEPA filter by gently pulling out the white ribbon on
the top.
Step 4: Pull out each filter with white ribbons.
7. PLACING THE UNIT:
In order to maximize the purification function,
the unit should be placed as high as possible.
A ceiling fan can also aid in purification of
the unit.
Suggested locations, listed in the
order of preference:
Nearest to the source of pollution.
Near cold-air areas in air
circulation.
In the area most frequently-used
to achieve maximum benefit.
Notes:
For maximum control, the unit should be placed where easy access to the
controls is possible.
The rear of the unit should always have at least one inch of open area to
allow unrestricted airflow.
Be sure power cord is not accessible to small children to prevent injury.
To Next Page
Loading...
