A
IOM-16 Oct 00 R2
DJM2.4
If any errors or omissions are noted in this manual please contact Engineered Air – Calgary Service
at (403) 287-2590 or Fax (403) 287-4799 or email service@engineeredair.com.
To ensure warranty is honored, only a qualified HVAC service person, who has received training on
the DJM2.4, should be employed for service and troubleshooting. If further information is required
please contact the nearest Engineered Air office.
Under no conditions (except for temporary copying) should the unit function description be
removed from the unit. There are two copies provided with the unit. One is in an envelope for
copying, then return it to the unit or store in a safe place. The other is attached to the control panel
door and should never be removed. If a copy of the function for a particular unit is needed, contact
Engineered Air with the unit serial number and DJM2 model number (ex model DJM-2.4).
This unit is connected to high voltages. Electrical shock or death could occur if
instructions are not followed. This equipment contains moving parts that may start
unexpectedly. All work should be performed by a qualified technician. Always
disconnect and lock out power before servicing. DO NOT bypass any interlock or
safety switches under any circumstances.
To Next Page
Loading...
