Do you have a question about the EnGenius EnStation 6 and is the answer not in the manual?
Ethernet Ports | 1 x 10/100/1000 Mbps |
---|---|
Wireless Standard | 802.11ac |
Frequency Band | 2.4 GHz, 5 GHz |
Maximum Data Rate | 300 Mbps |
PoE Support | 802.3af |
Wireless Mode | Access Point, Client |
Operating Modes | Access Point, Client |
Security | WPA/WPA2 |
Guides users through accessing and configuring the device via its web-based interface using a browser.
Explains how to download and use the EnWiFi mobile app for device configuration and management.
Describes the device's operation as a central connection point for wireless clients and stations.
Explains how the device functions as a wireless adapter to connect to an existing access point.
Details how the device can connect wirelessly to other devices using WDS technology as an access point.
Explains how the device expands WDS by receiving and sharing wireless signals via the Ethernet port.
Describes how the device extends Wi-Fi coverage by amplifying and re-transmitting signals.
Allows modification of the device's IP settings, including IPv4 and IPv6 configurations.
Manages various wireless parameters like Device Name, SSID, Channel, Transmit Power, and Bit Rate.
Allows selection of Operation Mode (AP, Station, Repeater, WDS) and configuration of Channel HT for optimal transmission.
Sets up security modes like WPA2-PSK/Enterprise, encryption, and Radius server details.
Allows saving and reloading device configurations, or restoring to factory/user defaults.
Details how to configure single devices or groups of devices using the EnWiFi app for wireless, network, and system settings.
Guides users on setting up WDS links for peer-to-peer connections by configuring SSID and security.
Details the process for selecting operation mode, radio, and checking status for group device configuration.
Guides on connecting client bridge devices to an access point mode device using the EnWiFi app.
Details setting the operation mode to WDS AP and configuring wireless settings for connected STA devices.
Explains selecting WDS STA mode and choosing an AP to connect, followed by wireless configuration.
Creates a configuration file from current settings to apply to other devices quickly.
Restores device configurations from a backup file to ensure consistent settings across devices.