Need help?Do you have a question about the EnGenius ENS202EXT and is the answer not in the manual?
General| 5 GHz | No |
|---|---|
| Modulation | 16-QAM, 64-QAM, BPSK, OFDM, QPSK |
| Frequency band | 2.4 GHz |
| Operating modes | Access Point (AP), Client Bridge, Client Router, Repeater, WDS |
| Channel bandwidth | 40 MHz |
| Transmitting power | 15 dBmW |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1x |
| Virtual LAN features | Tagged VLAN |
| Spread spectrum method | DSSS |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Maximum data transfer rate | 300 Mbit/s |
| Quality of Service (QoS) support | Yes |
| Supported data transfer rates | 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 300Mbps |
| Antenna features | Detachable antenna |
| Antennas quantity | 2 |
| Antenna direction type | Omni-directional |
| Antenna gain level (max) | 5 dBi |
| Placement | Wall |
| Product color | White |
| International Protection (IP) code | IP55 |
| Interface | LAN, WLAN |
| USB 2.0 ports quantity | 0 |
| Security algorithms | 802.1x RADIUS, WPA, WPA2 |
| Number of SSID supported | 4 |
| Storage temperature (T-T) | -30 - 80 °C |
| Operating temperature (T-T) | -20 - 70 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
| AC input voltage | 24 V |
| Flash memory | 16 MB |
| Internal memory | 64 MB |
| Package depth | 309.88 mm |
| Package width | 71.12 mm |
| Package height | 233.68 mm |
| Package weight | 725.7 g |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 185.42 mm |
|---|---|
| Width | 99 mm |
| Height | 28.95 mm |
| Weight | 317.5 g |
Specifies the system prerequisites for installing the ENS202EXT device.
Details the procedures for installing the ENS202EXT on a pole or wall.
Provides guidelines for selecting an optimal location before installation.
Details how to access the ENS202EXT's Web Configurator.
Offers procedures for secure and effective ENS202EXT management.
Explains general conventions used for information presentation.
Lists the items included in the ENS202EXT package.
Provides a general overview of the ENS202EXT features and capabilities.
Summarizes key advantages of WLANs over wired networks.
Details the technical specifications of the ENS202EXT hardware and software.
Specifies the system prerequisites for installing the ENS202EXT.
Details the procedures for installing the ENS202EXT on a pole or wall.
Provides guidelines for selecting an optimal location before installation.
Details how to access the ENS202EXT's Web Configurator.
Offers procedures for secure and effective ENS202EXT management.
View summary of current system status including hardware, software, date/time, and network info.
Displays general system information and LAN/WAN settings.
Lists clients associated with the ENS202EXT and their signal strength.
Displays a log of events triggered on the ENS202EXT interfaces.
Shows the current network status, including WLAN and WAN information.
Displays clients associated with the ENS202EXT via DHCP.
Lists clients associated with the ENS202EXT through WDS.
Configures the ENS202EXT's primary function and region.
Configures the ENS202EXT's LAN settings with static or dynamic IP.
Enables or disables the ENS202EXT Spanning Tree function.
Configures WAN settings for static IP, dynamic IP, PPPoE or PPTP.
Configures the ENS202EXT's LAN IP address, subnet mask, and DHCP server.
Enables PPTP, L2TP, and IPSec pass-through for VPN connections.
Enables server applications on LAN to serve clients on WAN via a single WAN IP.
Allows unrestricted Internet access for specific LAN applications via DMZ host.
Configures wireless and security settings for various operating modes.
Configures WEP, WPA-PSK, WPA2-PSK, and other wireless security modes.
Allows or denies network access to wireless clients based on MAC addresses.
Creates wireless backbone links between multiple access points.
Configures advanced wireless settings like data rate and transmit power.
Configures administration, VLAN, SNMP, backup/restore, and firmware settings.
Sets system time manually or automatically via NTP.
Controls wireless power ON/OFF service on a routine basis.
Enables or disables the ability to modify the ENS202EXT via CLI.
Displays and configures event logs for system debugging.
Verifies device availability and network responsiveness.
Enables protection against SYN and UDP flood attacks.
Details FCC compliance and interference guidelines for the device.
Provides Industry Canada compliance and interference guidelines.
Lists technical support contact information by region.
To Next Page
