EnGenius ENS202EXT - Product Layout

PRODUCT OVERVIEW PRODUCT LAYOUT
1-6
1.3 Product Layout
Figure 1-1: Back Panel View
A
B C D
E
BACK PANEL VIEW DESCRIPTION
A Power LED
OFF = ENS202EXT is not receiving power
ON = ENS202EXT is receiving power
B LAN (2) LEDs
OFF = ENS202EXT is not connected to the
network.
ON = ENS202EXT is connected to the
network, but not sending or receiving data
Blink = ENS202EXT is sending or receiving
data
CWLAN LED
(Access Point or Client Bridge Mode)
OFF = ENS202EXT radio is off and the
device is not sending or receiving data over
the wireless LAN.
ON = ENS202EXT radio is on, and the
device is not sending or receiving data over
the wireless LAN.
Blinking = ENS202EXT radio is on, and the
device is sending or receiving data over the
wireless LAN.
D Signal Indicator LED
(Client Bridge or WDS Station Mode)
Green - Signal is good
Orange - Signal is normal
Red - Signal is weak or non-existent
E Antenna Connectors