Need help?Do you have a question about the EnGenius ENS202 and is the answer not in the manual?
General| Wireless Standards | IEEE 802.11b/g/n |
|---|---|
| Frequency Band | 2.4 GHz |
| Max Data Rate | 300 Mbps |
| Antenna Type | Internal |
| Antenna Gain | 5 dBi |
| Ethernet Ports | 1 x 10/100 Mbps |
| Power over Ethernet (PoE) | Yes |
| PoE Standard | IEEE 802.3af |
| Power Method | PoE or DC power adapter |
| Mounting Options | Wall |
| Operating Modes | WDS Bridge |
| Security | WEP |
Highlights the key capabilities and advantages of the ENS202, including speed, range, and multi-functionality.
Provides step-by-step instructions for physically mounting and connecting the ENS202 device to a pole or wall.
Guides users on how to access and log in to the ENS202's web-based configuration interface.
Offers recommendations for securing and managing the ENS202, including password changes and configuration backups.
Guides on setting the primary function of the ENS202 (Access Point, Client Bridge, etc.).
Explains how to set up static or dynamic IP addresses for the ENS202's LAN interface.
Guides on setting up internet connection types like Static IP, Dynamic IP, PPPoE, and PPTP.
Setting a static IP address allows an administrator to set a specific IP address for the router.
Dynamic IP addressing assigns a different IP address each time a device connects to an ISP service provider.
PPPoE is used mainly by ISPs that provide DSL modems to connect to the Internet.
Configures the ENS202 LAN settings, including IP address, subnet mask, and DHCP server.
Covers the configuration of wireless and security settings for each possible operating mode.
Details how to set up wireless parameters like SSID, channel, and mode for Access Point mode.
Guides on configuring the ENS202 to act as a client bridge, connecting LAN segments wirelessly.
Explains how to configure the ENS202 to function as a client router, accessing the internet wirelessly.
Covers various wireless security modes like WEP, WPA-PSK, WPA2-PSK, and their configurations.
Details the configuration of WPA-PSK and WPA2-PSK security modes for enhanced wireless protection.
Covers various management functions including administrator accounts, VLAN, SNMP, and firmware upgrades.
Guides on changing the default username and password for accessing the ENS202.
Guides on how to update the ENS202 firmware to the latest version.
To Next Page