EasyManua.ls Logo

EnGenius ENS202EXT - Product Overview

EnGenius ENS202EXT
89 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PRODUCT OVERVIEW PRODUCT OVERVIEW
1-2
1.2 Product Overview
The ENS202EXT Wireless Outdoor unit provides not only
detachable antenna connectors for antenna upgrade, but also
high output power and high sensitivity can extend the transmis-
sion range to deliver a stable wireless connection. ENS202EXT
integrates 4 operation modes: Access Point, Client Bridge, Cli-
ent Router and WDS.
Advanced multi-function operation modes offer flexibility in con-
structing scalable wireless networks for all possible applica-
tions. ENS202EXT is designed to deliver reliable service under
harsh outdoor environment with certified IP65 protection and
tailored to accommodate multimedia streaming services with
data-rate up to 300Mbps. Most importantly, it is built-in encryp-
tion standards (WEP, WPA, WPA2, TKIP/AES and IEEE802.1x)
ensure maximum security and compatibility.
Hardware Features
High output power: Transmit high output power pro-
grammable for different country selections
High Data Rate: High speed transmitting rate up to
300Mbps with 2T2R 802.11n
Long range transmitting: Transmit power control and
distance control (ACK timeout)
Signal Strength Display: Indicate RF signal strength to
be shown as LEDs of 3 colors, making network build-up
easier. LED indicators have the best transmit and receive
signal for traffic communication
PoE Support: Support proprietary 24V passive power
over Ethernet
Software Features
Multiple SSID: 4 SSID supported. Each SSID can set
itself wireless or WAN access setting
PPPoE: Point-to-Point Protocol over Ethernet at Client
Router mode. This function will keep trying when failed or
disconnected
PPTP: Point-to-Point Tunneling Protocol (PPTP) is a
method for implementing virtual private networks
VLAN Pass-through: Support VLAN Pass-through
Firmware Upgrade: Upgrading firmware via web
browser, setting are reserved after upgrade
Reset & Backup: Reset to factory default. User can
export all setting into a file via WEB
Ping & Trace Route: Built-in PING function & Trace
Route function in Web GUI
MIB: MIB I, MIB II(RFC1213), Private MIB
SNMP: V1, V2c, V3

Table of Contents

Other manuals for EnGenius ENS202EXT

Related product manuals