EnGenius ENS202EXT - Technical Specification

PRODUCT OVERVIEW TECHNICAL SPECIFICATION
1-4
Technical Specification
Hardware Specification
 Physical Interface:
 2 x RJ-45 for 10/100 Fast Ethernet; one port is compat-
ible with PoE
 1 x Reset Button
 Power Requirements:
 Active Ethernet (Power over Ethernet)
 Proprietary PoE design
 Power Adapter 24V / 0.6A
Software Specification
 Operation Mode: Client Bridge, Access Point, Client
Router, WDS AP, WDS Bridge, WDS Station
 Wireless/Network:
 Auto Channel Selection (Setting varies by Regular
Domains)
 Obey Regulatory Power
 Distance Control (802.1x ACK (acknowledgement)
timeout)
 CLI Supported
 802.1x Supplicant (CB Mode)
 4 SSIDs
 WDS AP / WDS Bridge / WDS Station
 Multicast Supported
 RADIUS Accounting
 VLAN Tag / VLAN Pass-through
 Auto Reboot
 WiFi Scheduling
 Security:
 WEP Encryption-64/128/152 bit
 WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
 WPA/WPA2 Enterprise (WPA-EAP using TKIP)
 Hide SSID in beacons
 MAC address filtering, up to 50 field
 Wireless STA (Client) connected list
 QoS: WMM
Environment & Mechanical
 Temperature Range:
 Operating -20°C~70°C
 Storage -30°C to 80°C
 Humidity (non-condensing): 0%~90% typical
 Dimensions