EnGenius EWS377-FIT - User Manual

EWS377-FIT
EWS377-FIT Quick Start Guide
Quick Start Guide
EnGenius Fit Wi-Fi 6 4×4 Indoor Wireless
Access Point
Quick Start Guide
Introduction
This Quick Start Guide is designed to guide you through the
installation of the Fit 4x4 access point, model EWS377-FIT,
including hardware mounting and configuration.
FIT Managed Indoor
Access Point
Mounting Kit
Ceiling Mount Base
(9/16” T-Rail)
Spacer
Ceiling Mount Base
(15/16” T-Rail)
Product Card
Package Contents
• Wi-Fi 6 technology for high-performance Wi-Fi in high-density,
multi-device environments.
• Two spatial streams support up to 2,400 Mbps (5GHz) & 1,200
Mbps (2.4GHz).
• Multiple applications for cloud and on premises solutions.
Model: EWS377-FIT

Summary

Hardware Mounting

Ceiling Mount (T-Rail) Installation

Step-by-step guide for mounting the access point to a T-rail ceiling.

Powering the EnGenius Fit AP

Powering Options

Lists methods to power the access point: PoE switch, PoE injector, or power adapter.

Connecting to a PoE Switch

Instructions for powering the AP using a PoE-compliant network switch.

Powering with a PoE Injector

Instructions for powering the AP using a dedicated PoE injector.

Powering with a Power Adapter

Instructions for powering the AP using the included power adapter.

Management Plane Options

Cloud Management (FitXpress)

Manage APs via the FitXpress cloud platform and mobile app.

On-Premises Management (FitController)

Manage APs using a local FitController appliance.

Standalone Configuration

Configure and manage the AP directly via its local web GUI.

Cloud Management Setup (FitXpress)

On-Premises Management Setup (FitController)

Standalone Configuration Setup

EnGenius EWS377-FIT Specifications

General

Model	EWS377-FIT
Type	Wireless Access Point
Frequency Band	Dual-band
PoE Support	802.3af/at
Antenna Type	Internal
Antenna Gain (2.4 GHz)	3 dBi
Antenna Gain (5 GHz)	4 dBi
Ethernet Ports	1 x 1 Gbps
Mounting	Ceiling, Wall
Management	Web-based
Security	WPA3, WPA2, WPA