Need help?Do you have a question about the EnGenius EWS210AP and is the answer not in the manual?
General| Model | EWS210AP |
|---|---|
| PoE Support | 802.3af PoE |
| Operating Humidity | 10% to 90% (non-condensing) |
| Wireless Standards | IEEE 802.11a/b/g/n/ac |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Ethernet Ports | 1 x Gigabit Ethernet |
| MIMO Technology | 2x2 |
| Security Features | WPA2, WPA3, MAC filtering |
| Mounting | Ceiling, Wall |
| Operating Modes | Access Point, WDS |
Highlights the primary functionalities and benefits of the EnGenius EWS Series access points.
Details the minimum hardware and software needed to configure and operate the access point.
Offers guidelines on optimal placement and environmental factors for wireless signal strength.
Guides users through configuring TCP/IPv4 settings on Windows and macOS for network access.
Provides step-by-step instructions for connecting the access point physically and verifying initial power-up.
Specifies the default IP address, username, and password for initial access to the access point.
Explains the process of accessing and logging into the web-based interface for device setup.
Covers essential network configuration, including IP address, subnet mask, gateway, and DNS settings.
Guides users on setting up and managing wireless network names (SSIDs) for both bands.
Covers the configuration of security protocols like WEP, WPA-PSK, and WPA2-PSK for wireless networks.
Manages user access by changing the administrator username and password.
Details the procedure for updating the access point's firmware to the latest version.
To Next Page